Clay Trap Springs

Clay Pigeon Trap Springs for Sale

View your cartCheckoutIf you are not sure which spring you need
or want overseas postage
please ask me before you buy.

Buy now using the ‘Add to Cart’ button or call me to pay by BACS or cheque.
P&P will be calculated by size and weight at the checkout.
All parts posted next working day.
email: andrew@howtobreakclays.com         Mobile: 07769 818192


Extended Hook Clay Trap Spring (£55.00)

This is a new replacement spring for all known Stuart clay pigeon traps, suitable for singles and doubles in either tension adjustable or fixed post versions. This spring may also fit other traps with a notch cut into the main bearing housing. Made from high quality Swedish spring steel.

8mm wire x 51mm coil x 316mm long
Extended hook length, 86mm
Inside hook, max. 19mm at entry
Extended hook clay trap spring.
Extended Hook Clay Trap Spring, (above) and fitted to Stuart Clay traps below,
(l to r), No.1, No.2 and No.3 Teal.

Extended hook clay trap spring fitted to a Stuart No.1Extended hook clay trap spring fitted to a Stuart No.2Extended hook clay trap spring fitted to a Stuart No.3


Swivel Hook & Bolt Clay Trap Spring (£60.00)

This is a new replacement spring for all known semi-recocking lever or lever release traps. The spring can be fitted to all known versions of Farey manual traps including 360° and conventional cocking. Complete with 2 nuts and washers. Made from high quality Swedish spring steel.

7.9mm wire x 51mm coil x 447mm long
Thread, M12 x133mm
Hook length, 105mm
Inside hook, max. 25mm at entry.Swivel Hook & Bolt Clay Trap Spring
Swivel Hook & Bolt Clay Trap Spring, (above) and fitted to lever traps below, (l to r),
Flightmaster,
Farey and Clay Sport.
Swivel Hook & Bolt Clay Trap Spring fitted to a Flightmaster lever trap.Swivel Hook & Bolt Clay Trap Spring fitted to a Farey lever trap.Swivel Hook & Bolt Clay Trap Spring fitted to a Clay Sport Royal lever trap.


Extended Hook & Bolt Clay Trap Spring (£60.00)


This is a new replacement spring for all known versions of Clay Sport traps. If your trap had a spring with a large cast iron hook you may need to cut a notch into the main bearing housing. The extended hook & bolt spring will also replace the original spring on Clay Sport Royal traps. Complete with 2 nuts, washers and locating ring. Made from high quality Swedish spring steel.

7mm wire x 40mm coil x 427mm long
Thread, M12 x105mm
Hook length, 95mm
Inside hook, max. 19mm at entry.Extended Hook & Bolt Clay Trap Spring
This extended hook & bolt spring can be fitted to most Clay Sport traps to
replace the original wire only extended hook spring, (below left). The spring can also be used to replace the original cast hook spring if a new notch is cut into the main bearing housing, (below right).
Extended Hook & Bolt Clay Trap Spring fitted to a Clay Sport MasterExtended Hook & Bolt Clay Trap Spring fitted to a modified Clay Sport Master


Traditional Double Hook Coil Spring (£40.00)

This is a new replacement spring for your single or double trap and is suitable for all known versions of the Juba range of traps, including traditional double, single and rabbit arms. The spring can also be used as a lighter or trainer/junior spring when fitted to larger traps with an adjustable ‘U’ or eye bolt. Made from high quality Swedish spring steel.

6mm wire x 38mm coil x 255mm overall lengthTraditional Double Hook Coil Spring
Traditional double hook coil spring fitted to a Juba close pairs trap.Traditional Double Hook Coil Spring fitted to a Juba trap


Extended Eye & Bolt Spring (£60.00)

This is a new replacement spring for all known versions of Birdmaster traps, including Maxi, Trainer and Rabbit models. The spring is supplied with new bolts to replace your spring shaft and anchor bolt if necessary. Depending on the original shaft thread in your trap you may need to drill out the hole to fit the new bolt.
Complete with a new spring shaft bolt, spacer, washers & nut and anchor bolt, washer & nuts. Made from high quality Swedish spring steel.

7mm wire x 52mm coil x 250mm long
Thread, M10 x 50mm
Hook length, 95mm
Inside eye, 18mm


Extended Eye & Bolt Spring fitted to a Birdmaster Maxi Double trap, below.


Standard Double Clay Trap Spring, Inline & 90° Offset Hooks(£50.00)

Standard Spring, Inline hooks
£50.00
Standard Spring, 90° Offset hooks
£50.00
This is a new replacement spring for your heavier and/or stronger clay trap and may take a bit more effort to cock the trap. This spring can be fitted to some traps with adjustable ‘U’ bolts, one or two eye bolts, swivel and fixed post mountings.  Made from high quality Swedish spring steel.

8mm wire x 48mm coil x 273mm overall length.Standard Double Clay Trap Spring, Inline Hooks
Standard Double spring with inline hooks (above)
Standard Double spring with 90° offset hooks (below)Standard Double Clay Trap Spring, 90° Offset Hooks

Standard Double Clay Trap Spring, fitted to a Baowman No.3
A standard double spring with inline hooks fitted to a Bowman No.3


Medium Double Hook Spring, 90° offset Hooks (40.00)

Unused stock replacement spring, can be used on double or single traps. Ideal for lighter pairs from double traps or consistent singles, may also be suitable for junior trappers.

6.4mm wire x 44mm coil x 263mm overall lengthMedium Double Hook Spring, 90° offset Hooks
Bowman Markham trap rebuilt with a new spring, mainshaft and complete arm assembly.
Medium Double Hook Spring, 90° offset hooks fitted to a Bowman Markham


All the pictures are representative, individual parts may vary from those shown. All measurements are approximate. Postage and packing prices will be calculated at the checkout. Shipping price is for postage to mainland UK only, please ask for a quote outside this area. Please see Terms and Conditions for more details.